Manual Room Thermostat A 86

     
Manual room thermostat Temperature range 10- 30°C with ON/OFF switch

• Colour: White, RAL 9016
• Dimensions: (H x W x D) 86 x 25 x 86 mm
• Adjusting Range: 10 - 30°C / 0,5°C
• Mounting method: Surface-mounted
• Contact Capacity: 230V / 6 2-18
• Operating Voltage: 230V / 50 Hz
• Contact current: 6 (2) A

---

 

Programmable Room Thermostat D530 With Weekly Program

        

 

4 circuit times for 4 temperatures (Mo - Fr) and 2 circuit times for 2 temperatures (Sa + Su) in 0.5 C steps make the large difference to other thermostats. And with the adjustable temperature hysteresis, it leaves your desires with further scope The HOLD function allows you to raise or lower the room temperature over a longer period of time to a constant temperature. Manual operation is also possible. In the display, the alteration of the surrounding temperature is displayed with time and the adjusted surrounding temperature.

Technical data:

• Type: Room Thermostat With Weekly Program
• Colour: White, RAL 9016
• Display: Yes (30 x 30 mm)
• Dimensions: (H x W x D) 110 x 75 x 46 mm
• Adjusting Range: 10 - 30°C / 0,5°C
• Additional technical data: Relay is not potential free
• For Air Conditioners: Yes
• Mounting method: Surface-mounted
• Frost free function: Yes
• Contact Capacity: 230V / 6 2-18
• Operating Voltage: 230V / 50 Hz
• Hysteresis: 0,5 - 2,0C°
• Contact current: 6 (2) A
• Night decrease: Yes

---

 

Electronic Plug-in Room Thermostat UT 200

Universal thermostat UT 200 is connected to a wall socket. Based on the measured temperature it starts and shuts down the electrical appliances connected (230V~/50Hz, max. 16A, 3680VA). It is equipped with thermal sensor conected to a 2 m long cable.

Technical data:

• Type: Room Thermostat
  
• Colour: White, RAL 9016
• Display: Yes 
• Dimensions: (H x W x D) 55 x 40 x 134 mm
• Adjusting Range: 0°C - 50°C / 0,5°C
• For Heaters Air Conditioners: Yes
• Contact Capacity: 230V / 3680 Watt
• Operating Voltage: 230V / 50 Hz
• Contact current: 6 (2) A      
  

Wireless thermostat set „FS20 STR“

    

The wireless thermostat includes a ‘FS20 STR’ wireless thermostat and a ‘FS20 ST-2’
wireless switch sockets. It has many advantages over traditional thermostats that are built
into electrical radiators or air conditioners:
• The control functions in the FS 20 STR thermostat are not influenced by the immediate
proximity of the appliance as it is the case with integrated thermostats of electrical heating,
cooling or ventilating appliances.
The ‘FS 20STR’ wireless thermostat can, be mounted or installed independently
of the heating, cooling or ventilating appliance.
This means the temperature is measured at the desired location and the ‘FS20 ST-2’
wireless switch socket is turned on or off according the the received signal.
• If multiple FS20 switching units (for example, the ‘FS20 ST-2’ wireless switch socket) are
in use, the ‘FS20 STR’ can also control multiple heating, cooling or ventilating appliances.
• The time program option makes it possible to adapt the system to the lifestyle of its users,
so that the room is always comfortably warm when it is used. At other times energy can be
saved by reducing the temperature. It is no longer necessary to manually set and reset your
thermostats.
• The wireless thermostat ‘FS20 STR’ and a FS20 switching unit (for example, the ‘FS20 ST-2’
switch socket) allow to position the heating, cooling or ventilating appliances anywhere you like
without pulling long cables.
• The ‘FS20 STR’s thermlostat is battery operated and needs no cables to opertate.

Features: 

Color: gray
Range : 6 - 30°C
Hysteresis: ±0,2 (a) 2°C
Programming: 4/28 week/switching times
Frequency: 868.35 MHz
Power/Current of cut: 230V / 6 (2) A
Ordered catch: 230V/50Hz
Contact current: max. 3680 Watt